Cable Schedule and Endpoint Register Template
Download and print a blank cable register with cable IDs, From/To endpoints, construction, route, drawing revisions and linked test records for project handover.
Last updated:
Use one row per identified cable
A cable schedule identifies a physical cable and its endpoints. A panel directory describes what a circuit serves; a test record stores measurements. Keep those records linked by stable IDs rather than copying uncertain descriptions between them. This template records entered information and estimates no cable length or material quantity.
| Field | What to enter | Record convention |
|---|---|---|
| Cable ID | The unique identifier used on both ends and the project drawings. | Do not silently reuse a retired ID for a different cable. |
| From / To | Equipment ID plus terminal, port or connection reference at each end. | Define the project From/To direction; it does not necessarily mean signal direction. |
| Cable specification | Type, conductor or pair count, size and product reference. | Keep cable construction separate from the cable ID. |
| Route / drawing revision | Tray, conduit or pathway ID and current drawing reference. | Record verified routing separately from planned routing. |
| Test / status / notes | Test record ID, observed status and unresolved discrepancy. | An empty test-reference field does not mean the cable passed. |
Download or print the register
Download a blank cable schedule (CSV)
Ten blank rows with endpoint, specification, route, drawing and test-reference columns; no preset acceptance status.
Open the CSV in a spreadsheet and retain it with the project revision records. The table below is also a blank print sheet. Use the browser print command to print this page or save it as PDF.
| Cable ID | From / terminal | To / terminal | Specification | Route / drawing rev. | Test ID / notes |
|---|---|---|---|---|---|
| ____________ | ____________ | ____________ | ____________ | ____________ | ____________ |
| ____________ | ____________ | ____________ | ____________ | ____________ | ____________ |
| ____________ | ____________ | ____________ | ____________ | ____________ | ____________ |
| ____________ | ____________ | ____________ | ____________ | ____________ | ____________ |
| ____________ | ____________ | ____________ | ____________ | ____________ | ____________ |
| ____________ | ____________ | ____________ | ____________ | ____________ | ____________ |
Control changes at handover
- Assign the ID before marking and use the same identifier at the endpoints.
- Verify the physical endpoints against the approved drawing and record discrepancies.
- Update the route and drawing revision after changes, retaining the previous revision.
- Link the final test report using its actual identifier and recorded result.
Use a label material and attachment method appropriate to the cable and environment. This register does not prescribe a universal labeling standard or certify continuity. Keep panel directories, test records and firestop opening records as separate linked documents.